tronxy xy2 3d models

The prints shown in the pics were printed on a TronXY X1 with the stand using 0.2mm layer height, 20% infill, 50mm/s print speed, and tree supports for the inside of the rim (Cura quoted a total print time of 15hr, but it ended up printing in ~12 to...

I included the FreeCAD source file, so you even can adapt the current model to your personal needs.Happy Printing.Print SettingsPrinter: TronXY X5Rafts: NoSupports: YesResolution: 0.2Infill:100% / 23%Filament brand: NoyesFilament color: WhiteFilament...

Recommended (will help / not a must): - Soldering paste - A pump/sucker A few days ago I was asked to overhaul an old TRONXY X3. One of the things that needed to be done was to rewire the hotbed. So much movement back and forth ended up breaking...

I printed this using my trusty Tronxy X1, just used 0.2mm layer and I went for 60% infill, but should easily cope with 20%. Oh and those square tabs are simply to increase adhesion at the corners so they don't lift. I print onto a FRP board and...

... must be something inherent with the original thing because the duct footprint has only changed slightly. Print Settings Prototypes printed with Tronxy Orange PETG 0.2 resolution, 3 perimeters, 30% infill, 245C @ 35 mms on an Ender 3 Pro/ Ender 5

(seen toilet paper used as a at home DIY option, but filter material is also sold online for more "professional" build) TODO: -Design feet to lift off ground/bind lower two sections -figure out how to mount the blower and its cover (is mount to...

Power supply is sized from Tronxy S-360-24 model that came with the printer. Access lid on power supply allows easy wiring. - Stand (Shelf): Attaches to 2020 bottom rail with three bolts in side and one in top tab. Front bolt attaches to...

... in solid-looking parts. The front stock doesn't require much infill, so I chose 20%. Note: I uploaded a rounded shoulder pad model that I printed using Tronxy Flexible TPU filament; it looks and works great, taking some sting out of the recoil.

As a template I chose the print head for the Tronxy X5SA Pro from ammaryasir, which I also use (https://www.thingiverse.com/thing:4732443) And since you don't always have to reinvent the wheel, I took the toothed belt bracket from the E3D V6 Modular...

I've had great success with the overhead filament system for my A8 so I wanted to develop something for the TRONXY along those lines. I decided to try and incorporate a previous four-spool drybox/dispenser into the design. It can weigh almost 10lbs...

A major issue I've had with the TronXY X5SA Pro has been the ringing due to the fairly high moving mass traveling along the Y-Axis (the gantry and carriages). This modification is about as lightweight as I could go, and results in a 1/4 weight...

:) Older design: https://www.thingiverse.com/thing:2954579 I plan to write a full build-guide at some point when I have the spare time. Print Settings Printer: Tronxy 8 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 25% Filament: any...

A pic of the orientation I use has been included. Although the PETG version did eventually print well, and it is what I'm using on the TRONXY, I was getting quite frustrated and was simultaneously setting up a supported model for resin printing. A...

... to snip off the cable shroud clips adjacent to the bowden tube nozzle to clear the new cable tie retention detail. Print Settings Prototypes printed with Tronxy Orange PETG 0.2 resolution, 3 perimeters, 30% infill, 245C @ 35 mms on an Ender 3 Pro

Although I did need to trim the cable guide from the Petsfang fan base. Notes: The 2 red components in the pictures are the ones required to convert your stock Ender 3 to direct drive. This has been tested by rbalandis and works fully with the Mico...

So place the trap next to your kitchen sink or a fruit basket so the flies stay away from the good stuff. Update: #1: I added a version with a more round lid. Update #2: Added German LibreOffice file to print as how to use instructions. Print...

I was using my Anycubic I3 Mega as well which still didn't present a problem as it's cooling duct is on the left side, but when I through the model on my Tronxy XY-2 Pro, the fan duct smashed into the lid while the 3 mm tower in that key was...

2018-08-07: Added parameter stringAngle to angle string slots Print Settings Printer: Tronxy PM802 Rafts: No Supports: Doesn't Matter Resolution: 0.15 Infill: at least 50% Filament: Clas Ohlson Nylon is best Something cool Notes: Since this is a...

My last dabblings with Neopixels on my Tronxy X5S were controlled via Marlin and they worked well, but that wasn't an option for me with the Predator, at least not in its current state so I had a look around and checked out some Octoprint Plug-ins. ...

I plan to create an attachment for M12 or larger probes when time permits.\r\n\r\n**Edit 2017/09/011:** The first sensor mount is now available, which fits the [Tronxy XY-08N](https://www.gearbest.com/3d-printer-parts/pp_591321.html) and similar...

... to give me something back in return, I'd be extremely happy to see a post under "Makes"! :) Print Settings Printer: Tronxy X8 Rafts: No Supports: No Resolution: 0.1mm and up Infill: 20% and up Notes: All to personal preference. Category: 3D Printing

M3 x 6 - 10 mm screws for the perfboard Print Settings Printer: TronXY X5S Rafts: Doesn't Matter Supports: No Resolution: 0.6 mm nozzle, 0.28 mm layer height Infill: 15% Filament: Generic budget PLA any Post-Printing ============= CHECK THE VOLTAGE...

I made this so that I could better use plastic bushings on the bed of my Tronxy P802E instead of the noisy ball bearings. If plastic bushings are misaligned slightly they will bind and cause motor skips and getting them aligned can be very fussy...

I've had great success with the overhead filament system for my A8 so I wanted to develop something for the TRONXY along those lines. I decided to try and incorporate a previous four-spool drybox/dispenser into the design. It can weigh almost...

Furthermore, the material plates are freely selectable no matter whether wood, plastic aluminum or (plexi) glass Depending on the plate material I would then adjust the infil in order to get enough stability, I printed the test pattern with the...

... If you are using an upgrade aluminium head this does not have any cable clip and will clear the base part. Print Settings Prototypes printed with Tronxy Orange PETG 0.2 resolution, 3 perimeters, 30 % infill, 245C @ 35 mms on an Ender 3 Pro\ Ender 5

I have added split versions of the two files. If you still have problems with a tube try to lower the speed by 50% to allow the print to cool more and use a raft. (Thanks LordGrantham -> https://www.thingiverse.com/LordGrantham/about)...

My last dabblings with Neopixels on my Tronxy X5S were controlled via Marlin and they worked well, but that wasn't an option for me with the Predator, at least not in its current state so I had a look around and checked out some Octoprint Plug-ins. ...

... slightly. Just be aware of this if printing anything which is placed to the very rear left hand corner. Print Settings Prototypes printed with Tronxy Orange PETG 0.2 resolution, 3 perimeters, 30 % infill, 245C @ 35 mms on an Ender 3 Pro\ Ender 5

This is what I came up with and it got improved to suit my needs only. Happy printing Print Settings Printer: TronXY X5 Rafts: NoSupports: Yes Resolution: 0.2Infill: 15% Filament: Noyes PLA White, Blue, Black Notes: The perfect print to just use...